Brief introduction
ACD-302 Pressure transmitter is new product developed on our history experience. This transmitter cannot only output signal 4-20mA, but also can add RS485 communication. It can connect to computer or other interfaces with communication software and store, process and report output. It adopts the most advanced micro power and perfect software technology and five figures backlit displayed on LCD screen.
1. 11 units display: Pa kPa MPa psi bar mbar kgf/cm2 inH2O mmH2O inHg mmHg
2. 0.1 ~ 10 seconds per time acquisition speed
3. support RS485 and RS232 communication or 4-20mA or 1-5V output, free to choose
4. radial, axial, plate, spilt and investment installation type
5. five figures display on LCD screen and backlit function easy to read at night
6. never drop communication equipment, the trunk support 255sets of RS485 counter equipment
7. signal isolation technique, anti-electromagnetic interference and RFI technique
8. zero stable technology, increase the stability of the instrument
Product application
1. replace the imported transmitter outdoors or under bad environment
2. acquisition or communication whole day in the pit
3. oil well and gas well pressure monitoring and remote transmission
4. suit for large areas pressure parameters group acquisition
5. can work well in corrosive, impact and versatility environment
6. equipped with AncnView-T digital instrument test monitoring software
Product parameter
1. Display unit: Pa kPa MPa psi bar mbar kgf/cm2 inH2O mmH2O inHg mmHg
2. Measuring Range: Gage Pressure: -0.1MPa～260MPa
Differential Pressure: 0～3.5MPa
Aboslute Pressure: 0～60MPa
3. Accuracy grade: 0.05 0.1 0.2 0.5
4. Communication: RS485(compatible with modbusRTU and ANCN free protocol )
5. Output signal: 4-20mA two-wire system or 1-5VDC three-wire system.
6. Span shift: suggested less than 3:1
7. Power supply mode: 10-30VDC
8. Stability Performance: <0.2% FS per year
9. Operating temperature: -30℃～70℃
10. Relative humidity: ＜90%
11. Barometric pressure: 86-106KPa
12. Others: Calibration reference operating temperature 20℃±2℃
0.05 accuracy requires operating temperature 0-50℃
13. Medium Temperature: General temperature range （-40～120）℃
Wide temperature range （-60～150）℃
14. Display mode: five figures dynamic display and percentage bar chart
15. Protection Degree: IP65
16. Exdl: ExdIIBT6 Gb
17. Overload Pressure: 1.5-3 times of measuring range, depending on the measuring range
18. Software configuration: AncnView-T digital instrument test software with RS485 communication displaying instrument data, automatic recording, automatic drawing pressure curve and deriving to Excel, reading, printing and storage.
19. Process Connection: Metric M20×1.5、M14×1.5、M14×1
US/UK Standard: G1/2、G3/4、G1/8、G3/8, NPT 1/2、NPT 1/4、NPT 1/8
Install mode
Product model selection:
